manualshive.com logo in svg

Miele KMDA 7774, Operating And Installation Instructions, Page: 81 / 92

Share
Download
Miele KMDA 7774 Operating And Installation Instructions Download Page 81

Installation

81

Onset installation

Prepare the worktop cut-out
Remember to maintain the minimum
safety distances (see "Safety
distances").

Seal the cut surfaces on 

wooden

worktops

 with a suitable heat-

resistant sealant to avoid swelling
caused by moisture. The sealant
must be temperature-resistant.

Make sure that the sealant does not
come into contact with the top of the
worktop.

Attach the seal provided underneath
the edge of the hob.

Feed the mains connection cable
down through the cut-out.

Place the hob centrally in the cut-out.
When doing this make sure that the
seal of the appliance sits flush with
the worktop on all sides. This is
important to ensure an effective seal
all round.

Do not use any additional sealant
(e.g. silicone) on the hob.

If the seal does not meet the worktop
correctly on the corners, the corner
radius (≤ R4) can be carefully scribed
to suit.

Connect the hob to the mains.

Check that the hob works.

Summary of Contents for KMDA 7774





























































































Reviews:

No comments