manualshive.com logo in svg

Miele KMDA 7774, Operating And Installation Instructions, Page: 82 / 92

Share
Download
Miele KMDA 7774 Operating And Installation Instructions Download Page 82

Installation

82

Flush-fit installation

Prepare the worktop cut-out
Remember to maintain the minimum
safety distances (see "Safety
distances").

Solid wood, tiled and glass worktops:
Fix a wooden frame 5,5 mm below
the top edge of the worktop (see
diagram in "Building-in dimensions -
flush-fit hobs).

Attach the seal provided underneath
the edge of the hob.

Feed the mains connection cable
down through the cut-out.

Centre the hob in the cut-out.

The gap between the ceramic surface
and the worktop must be at least
2 mm wide. This is so that the hob can
be sealed.

Connect the hob to the mains.

Check that the hob works.

Seal the gap between the hob and
the worktop with a silicone sealant
that is heat-resistant to at least
160°C.

Unsuitable sealant can damage
natural stone.
For natural stone worktops and
natural stone tiles, only use silicone
sealant that is specially formulated
for natural stone. Please follow the
manufacturer's instructions.

Summary of Contents for KMDA 7774





























































































Reviews:

No comments