manualshive.com logo in svg

Miele KMDA 7774, Operating And Installation Instructions, Page: 50 / 92

Share
Download
Miele KMDA 7774 Operating And Installation Instructions Download Page 50

Cleaning and care

50

Cooker hood drip tray

Clean the drip tray if liquid from food
being spilled or boiling over has got into
the cooker hood.

Remove the grease filter and clean as
described in "Grease filters".

Hold the drip tray securely and open
the 4 catches (2 on the right and 2 on
the left). Hold the drip tray
horizontally and carefully take it out of
the housing.

Pour the liquid away.

Clean and dry the drip tray.

Also clean and dry accessible arease
inside of the cooker hood.

Secure the drip tray back in the
housing.

Replace the grease filter and replace
the extraction grille.

Grease filter / extraction grille

The extraction grille and the reusable
metal grease filter collect solid matter
from kitchen vapours (grease, dust etc.)
and therefore prevent soiling of the
cooker hood. The grease filter must be
cleaned after 30 hours of use. The 

sensor will light up.

An oversaturated filter is a fire
hazard.
Clean the grease filter regularly.

Removing the grease filter

Lift up the extraction grille.

Remove the grease filter carefully. Do
not let the grease filter tip over.

Pour out any liquid which has
collected at the bottom of the grease
filter.

Summary of Contents for KMDA 7774





























































































Reviews:

No comments