manualshive.com logo in svg

Miele KM 7404 FX, Operating And Installation Instructions

Share
Download
Miele KM 7404 FX Operating And Installation Instructions Download Page 57

Problem solving guide

57

Issue

Cause and remedy

The sensors show
increased sensitivity or
fail to react.

The sensitivity level of the sensors has changed.

Make sure that there is no direct light (from the sun
or from an artificial source) falling onto the hob.
The area surrounding the hob must not be too
dark.

Make sure that there is nothing covering the
sensors or the hob. 
Take any pans off the hob and wipe away any food
deposits.

Interrupt the power supply to the hob for approx.
1 minute.

If the problem persists after power has been
restored, please contact your Miele dealer.



 alternating with a

number flashes in the
timer display.



The overheating protection mechanism has been
activated.

See „Overheating protection“.



, 



 or 



The fan is blocked or defective.

Make sure it has not been blocked by something
like a fork. Remove the cause of the blockage.

If this fault code continues to appear in the
display, contact your Miele dealer.



 and other numbers

There is a fault in the electronic module.

Interrupt the power supply to the hob for approx. 1
minute.

If the problem persists after power has been
restored, please contact your Miele dealer.

Summary of Contents for KM 7404 FX





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands