manualshive.com logo in svg

Miele KM 7404 FX, Operating And Installation Instructions

Share
Download
Miele KM 7404 FX Operating And Installation Instructions Download Page 46

Safety features

46

System lock / Safety lock

Your hob is equipped with a system
lock and a safety lock to prevent the
hob and the cooking zones being
switched on or any settings being
altered by mistake.

The 

system lock

 is activated when the

hob is switched off. If the system lock is
activated, the hob cannot be switched
on and the timer cannot be used. A set
minute minder time continues to count
down. The hob is programmed so that
the system lock must be activated
manually. It can be programmed to be
activated automatically 5 minutes after
the hob has been switched off (see
“Programming”).

The 

safety lock

 is activated when the

hob is switched on. When the safety
lock is activated, the hob can be
operated only under certain conditions:

– The cooking zones and the hob can

only be switched off.

– A set minute minder time can be

modified.

If an unavailable sensor control is
touched whilst the system lock or
safety lock is activated 



 will appear

in the timer display for few seconds and
a tone will sound.

Activating the system lock

Touch the 

 sensor for 6 seconds.

The seconds can be seen counting
down in the timer display. When this
time has elapsed 



 will appear in the

timer display. The system lock has been
activated.

Deactivating the system lock

Touch the 

 sensor for 6 seconds.



 will appear briefly in the timer

display and then the seconds will be
seen counting down. The system lock is
deactivated once the time has elapsed.

Summary of Contents for KM 7404 FX





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands