Operation
38
Residual heat indicator
If the cooking zone is still hot, the
residual heat indicator will light up after
it has been switched off.
The lines of the residual heat indicator
go out one after another as the cooking
zone cools down. The last horizontal
line only goes out when the cooking
zone is safe to touch.
Risk of burning due to hot
cooking zones.
The cooking zones will be hot after
use.
Do not touch the cooking zones
while the residual heat indicators are
on.
Power level setting - Extended
setting range
Touch the numerical keybank in
between two number sensors.
The power level selected will flash for a
few seconds and then light up
constantly. The intermediate setting will
be represented by an illuminated dot
next to the number.
PowerFlex area
The PowerFlex cooking zones combine
automatically to form a PowerFlex
cooking area when you place a
sufficiently large pot or pan on them
(see “Guide to the appliance - Hob”).
Settings for the linked cooking area are
controlled by the numerical keybank of
the front or left PowerFlex zone
(depending on model). The PowerFlex
cooking area can also be switched on
and off manually.
Position the pan centrally on the
PowerFlex cooking area.
Manually switching PowerFlex
cooking zones on together/
separately.
Touch the
or
sensor.
Summary of Contents for KM 7404 FX
Page 4: ...Contents 4 Flush fit installation 78 Electrical connection 79 ...
Page 14: ...14 ...
Page 82: ......
