manualshive.com logo in svg

Miele KM 7404 FX, Operating And Installation Instructions

Share
Download
Miele KM 7404 FX Operating And Installation Instructions Download Page 28

Before using for the first time

28

Con@ctivity

Con@ctivity is the direct communication
system between an electric Miele hob
and a Miele cooker hood. Con@ctivity
enables the cooker hood to operate
automatically depending on the
operational state of a hob.

Further information can be found in the
installation and operating instructions
for your cooker hood.

Availability of the WiFi connection

The WiFi connection shares a frequency
range with other appliances (including
microwave ovens and remote control
toys). This can give rise to sporadic or
even complete connection failures.
Therefore, the availability of featured
functions cannot be guaranteed.

Setting up Con@ctivity

Con@ctivity via the home WiFi
network (Con@ctivity 3.0)

Prerequisite:

– Home WiFi network

– WiFi-enabled Miele cooker hood

Connect the cooker hood and the
hob to your home WiFi network (see
“Initial commissioning –
Miele@home”).

The Con@ctivity function will be
activated automatically.

Summary of Contents for KM 7404 FX





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands