Miele KM 6520 FL, Operating And Installation Instructions

Page: 37 / 80

Additional functions
37
Stop & Go
When Stop & Go is activated, the power
level of all cooking zones in use is
reduced to power level 1.
The cooking zone power levels and the
timer settings cannot be altered; the
hob can only be switched off. The
minute minder, switch-off times and
heat-up boost times continue to run.
When Stop & Go is deactivated, the
cooking zones will operate at the power
level previously selected.
If the function is not deactivated within
1 hour, the hob will switch off.
Activating/Deactivating

Touch the

sensor control.
Use this function when the sensors
need to be cleaned quickly.
Recall
If the hob is switched off by mistake
during use, this function can be used to
reset all settings. For this to work, the
hob must be switched on again within
10 seconds of being switched off.
 Switch the hob on again.

Immediately after switching the hob
on, touch one of the flashing cooking
zone sensor controls.