Miele KM 6520 FL Operating And Installation Instructions Download Page 30

Page: 30 / 80

Operation



Risk of fire with overheated food.

Unattended food can overheat and
catch alight.
Do not leave the hob unattended
whilst it is being used.

Switching on the hob



Touch the



sensor.

Other sensors will light up.

If no further entry is made, the hob will
switch itself off after a few seconds for
safety reasons.

Setting the power level



Place a pan on the cooking zone you
want to use.



Touch the relevant cooking zone
display.

The cooking zone display will begin to
flash.



Touch the appropriate sensor control
on the numerical keybank for the
power level you want.

The power level selected will flash for a
few seconds in the hob display and
then light up constantly.

Changing the power level



Touch the relevant cooking zone
display.

The cooking zone display will begin to
flash.



Touch the appropriate sensor control
on the numerical keybank for the
power level you want.

Switching off a cooking zone



To switch a cooking zone off, touch
the display for the relevant cooking
zone.

The cooking zone display will begin to
flash.



Touch the 0 sensor control on the
numerical keybank.



To switch off the hob and all the
cooking zones, touch the



sensor.

Summary of Contents for KM 6520 FL

















































































Search results

Summary of Contents for KM 6520 FL

Reviews:

Related manuals for KM 6520 FL

Brands by name

Popular brands

Miele KM 6520 FL, Operating And Installation Instructions

Search results

Summary of Contents for KM 6520 FL

Reviews:

Related manuals for KM 6520 FL

Brands by name

Popular brands