manualshive.com logo in svg

Miele KM 6520 FL, Operating And Installation Instructions

Share
Download
Miele KM 6520 FL Operating And Installation Instructions Download Page 46

Cleaning and care

46

Risk of burning due to hot

cooking zones.
The cooking zones will be hot after
use.
Switch the hob off.
Allow the cooking zones to cool
down before cleaning the hob.

Risk of damage due to moisture

ingress.
The steam from a steam cleaning
appliance could reach live electrical
components and cause a short
circuit.
Do not use a steam cleaner to clean
the hob.

All surfaces could be discoloured or
damaged if unsuitable cleaning
agents are used. All surfaces are
susceptible to scratching.
Remove all cleaning agent residues
immediately.
Never use abrasive sponges or
cleaning agents.

Allow the hob to cool down before
cleaning.

Clean the hob after every use.

Dry the hob thoroughly after cleaning
with water to avoid limescale residue.

Unsuitable cleaning agents

To avoid damaging the surfaces of the
appliance, do not use:

- washing-up liquid

- cleaning agents containing soda,

alkalines, ammonia, acids or
chlorides

- cleaning agents containing descaling

agents

- stain and rust removers

- abrasive cleaning agents, e.g.

powder cleaners and cream cleaners

- solvent-based cleaning agents

- dishwasher cleaner

- oven sprays

- glass cleaning agents

- hard, abrasive brushes or sponges

(e.g. pot scourers) or sponges which
have been previously used and still
contain abrasive cleaning agents

- melamine eraser blocks

Summary of Contents for KM 6520 FL

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands