To assemble the wok-burner
^
Position the burner head
r
to the burner base
u
, so that
the ignition safety device
s
and the ignitor
t
fit through
the holes of the burner head.
The lobe
a
on the burner cap must fit into the recess
b
of
the burner head.
The pin
c
on the burner head must fit into the recess
d
of
the burner base.
^
Position the burner ring
q
over the burner head
r
.
^
Position the outer burner cover
p
onto the burner head
r
ensuring that all locating tabs are in the correct position.
^
Finally, position the inner burner cover
o
into position.
Cleaning and care
29
Summary of Contents for KM 2256
Page 59: ...59 ...
Page 60: ...Alteration rights reserved 1212 M Nr 07 012 921 04 ...
