Switching on
,
Do not leave the appliance unattended whilst it is
being used.
^
The control for the burner required must be pressed in and
turned anti-clockwise to the largest flame symbol to switch
on. The ignition clicks, and the gas is lit.
If the burner does not ignite, turn the control to "
ß
". Ensure
that the room is well ventilated, and wait at least 1 minute
before trying to light the cooktop again.
If the burner does not ignite the second time, turn the control
to "
ß
", and see "Problem solving guide".
When switching on, re-ignition sometimes occurs (1-2 clicks)
if the flame on the thermal element goes out briefly, or if the
thermal element is not hot enough, e.g. following a gust of air.
Operation
19
Summary of Contents for KM 2256
Page 59: ...59 ...
Page 60: ...Alteration rights reserved 1212 M Nr 07 012 921 04 ...
