In the following illustration the lower
door is not shown in the closed
position to make it easier to see
what happens next.
^
Turn door support
b
around, pull
hinge pin
a
out, and refit on the
opposite side.
^
Fit both parts into hinge plate
f
. To
do this push hinge pin
a
through
hinge plate
f
into door support
b
.
Swing the door support in, push
upwards and re-assemble with screw
c
.
^
Align the lower door with the
appliance housing using the long slot
in hinge plate
f
. Then tighten screw
c
.
^
Refit plinth fascia
d
, pushing it firmly
into position.
^
With the lower door open, secure
cover
e
to the front of the plinth
fascia.
Refitting the handles:
^
Loosely screw the handles to the
opposite side of the doors.
The mounting plate must fit snugly to
the door housing. If it doesn't:
^
Tighten the two screws
a
with the
allen key provided as far as they will
go.
^
Tighten screws
b
.
^
Slide the side section of the handle
into the guides on the mounting plate
until it clicks into place.
Changing the door hinging
46
