^
Remove cover
h
, and unscrew hinge
bracket
i
.
^
Fit hinge pin
j
in the second hole of
hinge bracket
i
.
^
Refit bracket
k
and cover
l
turned
through 180° on the opposite side.
^
Screw hinge bracket
i
into the
opposite side.
The
M4 screw
has to be screwed into
the left hole of the hinge bracket.
^
Turn cover
h
through 180°, and fit it
on the other side.
^
Exchange cover
m
in the middle of
the appliance with hinge bracket
o
.
To do this:
Unscrew cover
m
and hinge bracket
o
, turn them around and screw in on
the opposite side.
^
Pull bearing bush
n
downwards out
of hinge bracket
o
and refit it from
above into the hinge bracket.
^
Remove spacer
p
with a screwdriver
and refit it on the opposite side.
^
Remove plugs
q
from the door
bearing bushes in the doors and refit
on the opposite side.
^
Hang the upper door on hinge pin
j
and then close the appliance door.
^
Push middle hinge pin
f
from below
through hinge bracket
o
into the
upper appliance door.
^
Check that the upper door is
correctly aligned. If necessary align it
using the long slots in hinge bracket
o
.
^
Hang the lower door in hinge bracket
o
then close the appliance door.
Changing the door hinging
45