Preparing the appliance
^
Slide cover strip
a
into the holder as
shown, with the bumps facing
downwards. The bumps will fit into
keyhole slots
b
.
^
Position the mains electricity cable so
that the appliance can be connected
easily once installed.
^
Secure fixing brackets
c
(supplied)
to the appliance doors by screwing a
hexagon screw
d
into the pre-drilled
holes.
(With large furniture doors, attach a
third pair of fixing brackets
c
in the
handle region of the doors).
^
Push the appliance two-thirds of the
way into its niche.
When doing this, make sure that the
mains cable does not get trapped.
With 16 mm thick unit walls
:
^
Clip spacers
e
onto the top hinges
and spacers
f
onto the bottom
hinges.
Building in the appliance
59
Summary of Contents for KF 9757 iD-3
Page 66: ...66 ...
Page 67: ...67 ...
Page 68: ...Alteration rights reserved 0412 KF 9757 iD 3 KF 9757 iD 4 M Nr 09 308 800 00 ...
