Miele KF 9757 iD-3 Page 65 Operating And Installation Manual Download

Page: 65 / 68

Close both of the doors, and align
them with the neighbouring furniture
doors.

Whilst counterholding adjusting bolts

with a screwdriver, tighten nuts

on the appliance doors with ring
spanner

Cover strip

must be completely

hidden in the niche, and must not
protrude.

Tighten all screws again.

Replace top cover

, and snap it

into place.

Replace side covers

, making sure

they snap into place.

Replace side covers

, making sure

they snap into place.

To make sure the appliance is
correctly fitted:

– The doors must close properly.

– The doors must not touch the

housing unit.

– The seals at the top edge of the

handle side must fit properly.

To double check place a torch in the
appliance and close the doors. Turn
the lights out in the room. If you can
see any light shining out from the
sides double check the installation.

Building in the appliance

Summary of Contents for KF 9757 iD-3





































































Search results

Summary of Contents for KF 9757 iD-3

Reviews:

Related manuals for KF 9757 iD-3

Brands by name

Popular brands

Miele KF 9757 iD-3, Operating And Installation Manual

Search results

Summary of Contents for KF 9757 iD-3

Reviews:

Related manuals for KF 9757 iD-3

Brands by name

Popular brands