Miele KF 9757 iD-3, Operating And Installation Manual

Page: 41 / 68

To remove the stainless steel trim from
the lid of the butter and cheese
compartment (in the top of the door),
proceed as follows:
^
Take the butter and cheese
compartment out of the refrigerator
section.
^
Open the lid of the compartment.
The stainless steel trim is a tight fit
across the plastic lid and will require
sufficient force to detach it.
^
Detach the stainless steel trim from
the edge of the lid (1.) at one side
and remove.
^
Press the white plastic stoppers out
of notches (2.).
^
After cleaning, refit the stainless steel
trim onto the lid in the reverse order.
^
Remove the compartments and the
lid from the PerfectFresh zone (see
"Adjusting the interior fittings -
PerfectFresh zone compartments")
^
Pull the dividing plate out with both
hands.
^
Take out any removable parts, e.g.
shelves, for cleaning.
Cleaning the interior and
accessories
^
Clean the appliance at least once a
month.
Remove soiling immediately to
prevent it from drying on.
Use lukewarm water with a little
washing-up liquid.
The following are dishwasher safe:
– the butter dish, egg trays, ice cube
tray, freezer tray (supplied as stan-
dard, depending on model)
– the bottle and condiment shelves in
the door (removed from their stainless
steel frames)
– the butter and cheese compartment
(with the stainless steel trim removed)
The stainless steel frames and the
stainless steel trim on the butter and
cheese compartment in the door are
not suitable for cleaning in a
dishwasher.
Cleaning and care
41