Miele KF 9757 iD-3 Page 58 Operating And Installation Manual Download

Page: 58 / 68

All fitting instructions given are for a

right hand hinged

appliance. If you

have converted the appliance to left
hand hinging you will need to adapt
these instructions accordingly.

To install the appliance you will need
the following

– a cross-slotted screwdriver,

– a selection of Torx screwdrivers,

– a hexagon spanner.

Weight of the furniture doors

Before fitting furniture doors, ensure
that the weight of the door does not
exceed the maximum permitted:

Appliance

max.
weight
of upper
door in
kg

max.
weight
of lower
door in
kg

KF 9757 iD-3
KF 9757 iD-4

Fitting a door which is heavier than
the maximum permitted could
damage the hinges.

Building into a peninsular run

When built into a peninsular run, the
rear of the building-in niche must be
fitted with a kitchen furniture panel.

Aligning the housing unit

The housing unit must be carefully
aligned using a spirit level before
installing the appliance. The unit
corners must be at right angles, as
otherwise the furniture door will not
align correctly with the 4 corners of the
appliance.

Building in the appliance

Summary of Contents for KF 9757 iD-3





































































Search results

Summary of Contents for KF 9757 iD-3

Reviews:

Related manuals for KF 9757 iD-3

Brands by name

Popular brands

Miele KF 9757 iD-3, Operating And Installation Manual

Search results

Summary of Contents for KF 9757 iD-3

Reviews:

Related manuals for KF 9757 iD-3

Brands by name

Popular brands