Installation
*INSTALLATION*
112
Installing and removing the
oven
For safety reasons, only use the oven
when it has been fully installed.
The oven requires a sufficient supply
of cool air for efficient operation. The
required supply of cool air must not
be excessively heated by other heat
sources (e.g., wood burning stoves).
The following must be observed
when installing the appliance:
Make sure that the shelf that the
oven sits on does not touch the wall.
Do not install heat insulation strips
on the side walls of the cabinet
carcase.
Do not open the bottom door when
the oven is on the floor. This could
damage the door.
Do not open the bottom door until
the oven has been installed inside
the housing unit.
Fixing the handle (depending on
model)
Install the handle on the pins.
Tighten the four screws with the
screwdriver supplied.
