Electrical connection
@ä
Electrical connection of the
appliance should be undertaken by
a qualified electrician in strict ac-
cordance with national and local
safety regulations.
Caution:
In order to avoid a hazard this ap-
pliance must be installed according
to these instructions for installations.
Fusing arrangements must be accord-
ing to national and local standards.
Connection should be made via a suit-
able isolator switch which complies
with national and local regulations. It
should be easily accessible for servic-
ing work.
The
data plate
gives the necessary
connection rating
, which must be ac-
cording to national and local standards.
When contacting the Service Depart-
ment, please quote the voltage, model
and serial numbers given on the data
plate.
WARNING
THIS APPLIANCE MUST BE
EARTHED.
Test certificates awarded . . . . . . . . . . .
. . . . . . . . Electrical Safety, C-Tick Mark
Electrically suppressed acc. to . . . . . .
. . . . . . . . . . . . . . . . . . . . . AS/NZS 1044
@
Underbench oven
The underbench oven is suitable for
connection to an a.c. single phase
240 V, 50 Hz electricity supply.
The fuse rating is 32 amps with hob.
Possible combination:
The underbench oven can only be com-
bined with the ceramic hob KM 212.
Wall oven
The wall oven is suitable for connection
to an a.c. single phase 240 V, 50 Hz
electricity supply.
The fuse rating is 16 A.
ä
Underbench oven
The underbench oven is suitable for
connection to an a.c. single phase 230
V, 50 Hz electricity supply.
The fuse rating is 32 amps for H 212 E
with hob.
Possible combination:
The underbench oven can only be com-
bined with the ceramic hob KM 212.
Wall oven
The wall oven is suitable for connection
to an a.c. single phase 230 V, 50 Hz
electricity supply.
The fuse rating is 16 A.
57
Summary of Contents for H 212 B
Page 67: ...67 ...