. . . strange noises are heard when
the microwave or microwave / combi-
nation mode is being used.
Check whether:
– sparks are being created by the use
of metallic crockery, (see Section on
Suitable crockery).
– the food is covered with aluminium
foil. If so, remove it.
. . . a programme can not be stored
using “M”.
Check whether:
– Microwave mode has been selected,
– a power setting and time have been
entered.
. . . the required time for a Memory-
Programme can not be set
Check whether:
– the total of the times entered for all
the Memory-Programmes with a
power setting of 1200 W adds up to
more than 10 minutes.
– the total of the times entered for all
the Memory-Programmes with a
power setting of 850 W adds up to
more than 60 minutes.
. . . An “F” appears in the display
field together with a number
This combination indicates a fault mess-
age.
The fault message “
F02
” appears when
the door is opened and at the same
time the Start touch control is pressed.
Disconnect the appliance from the
power supply (switch off and remove
the plug from the socket, or switch
off at the isolator, and then reconnect
immediately.
The Fault message disappears.
This also applies to the fault message
“
F01
”.
If the fault message remains in the dis-
play field, or reappears after Start is
pressed in, call the Service department.
If an
F in combination with any other
number appears e.g. “F10", ”F11",
“F12",
call the Service department.
Inform customer service of the fault
code displayed.
Problem solving guide
72