![background image](http://html.mh-extra.com/html/miele/g-7836-cd/g-7836-cd_operating-instructions-manual_234821009.webp)
This machine complies with all
relevant legal safety requirements.
Incorrect use can lead to personal
injury and damage to property.
Read these operating instructions
carefully before starting to use this
machine. This way you will avoid the
risk of accidents and damage to the
machine.
Keep these instructions in a safe
place for reference, and pass them
on to any future user.
Correct use
This washer-disinfector is designed
for specialised applications only,
as described in these operating
instructions. Alterations or conversions
to the machine or using it for purposes
other than those for which it was
designed are not permitted and could
be dangerous.
This machine must only be used for
cleaning and disinfecting instruments
or medical products and laboratory
ware if the manufacturer has stated that
they are suitable for machine
processing. Manufacturer's cleaning
and maintenance instructions for
instruments etc. must also be
observed.
The manufacturer cannot be held liable
for damage caused by improper or
incorrect use of the machine.
This equipment may only be used
in mobile installations such as
ships etc. if a risk assessment of the
installation has been carried out by a
suitably qualified engineer.
Please pay attention to the following
notes to avoid injury and damage.
The machine should be
commissioned and then
maintained only by a Miele authorised
and trained service technician. To
ensure compliance with the Medical
Devices Directive a Miele service
contract is recommended. Repairs and
other work by unqualified persons
could be dangerous.
Do not install the machine in an
area where there is any danger of
explosion or of freezing conditions.
The electrical safety of this
machine can only be guaranteed if
connected to a correctly installed
earthing system on site. It is most
important that this basic safety
requirement is tested regularly, and
where there is any doubt the electrical
system should be inspected by a
qualified electrician.
The manufacturer cannot be held liable
for damage or injury caused by the lack
of or inadequacy of an effective
earthing system (e.g. electric shock).
A damaged machine is a safety
hazard. Switch off at the mains im-
mediately and call the Miele Service
Department or an authorised and
trained Miele Service Dealer.
Warning and safety instructions
9
Summary of Contents for G 7836 CD
Page 63: ...63 ...
Page 64: ...Alteration rights reserved 2206 M Nr 06 507 991 00 de GB ...