Electro-thermal door lock
This machine is equipped with an
electro-thermal door lock.
The door can only be opened when:
– the electricity supply to the machine
is switched on,
– the master switch
I-0
is pressed in,
and
– a cleaning or disinfection programme
is not in progress.
To open the door
^
Press the
5
door button, and holding
onto the door grip open the door.
,
Do not touch the heating
elements if you open the door during
or directly after the end of a
programme: you could burn
yourself. The elements remain hot for
some time after the end of the
programme.
To close the door
^
Lift the door upwards and push until
it clicks shut.
To open the door with the
emergency release
,
The emergency release should
only be used when the door cannot
be opened normally, e.g. in the
event of a power failure.
Be especially careful when using
DESIN programmes - read the notes
in the Warning and Safety
instructions carefully.
If a great deal of hot water is present
in the wash cabinet when the
programme is interrupted and the
door is then closed quickly, hot wa-
ter can escape.
Danger of burning or scalding.
^
Switch the machine off with the
I-0
button.
^
The emergency release cable is
located at the bottom of the machine
behind the service panel. Pull it
downwards to open the door.
Opening and closing the door
14
Summary of Contents for G 7836 CD
Page 63: ...63 ...
Page 64: ...Alteration rights reserved 2206 M Nr 06 507 991 00 de GB ...