C. AWK - Automatic mobile unit
recognition
^
Select operating level "C".
^
Insert mobile unit with coding.
Make sure that no metallic parts or
pieces are stuck to the magnetic
strip or its underside.
Attached metallic objects can cause
the coding to be misread or
unreadable.
^
Close the door.
Before pressing the start button to
begin the program, it is essential to
check that the program required
for
this mobile unit
is the one shown in
the display.
Otherwise, inadequate cleaning and
disinfection could result.
Do NOT allow the programs for
mobile units with automatic
recognition (AWK, fixed program
slots) to be used interchangeably.
^
Press the "Start" button
6
.
Program sequence
Once started, the program proceeds
automatically. The program is done
when the display shows PROGRAM
END and the background lighting
flashes (press any button to stop the
flashing).
For general information on switching off
the flashing signal, see the section on
"System function" in the "Programming
manual".
Detailed information on program
sequences is available in the
appendix to the "Programming
manual".
The display background lighting
goes out automatically after approx.
15 min., it can be re-activated by
pressing any button on the panel.
Operating the machine
40
