This appliance complies with all
applicable safety laws and
regulations. However, inappropriate
use can lead to personal injury and
property damage.
Read the operating instructions
carefully before using this machine.
This will help keep you safe and
avoid damage to the machine.
Keep these instructions in a safe
place.
Proper use
~
This machine is intended only for the
purposes specified in the operating
instructions. Any other uses,
conversions and modifications are not
allowed and can be dangerous.
The cleaning and disinfection
processes described here apply only to
those instruments, medical products
and labware that are specifically
designed by the manufacturer to be
re-used. Follow the product
manufacturer's instructions.
Miele will not be held liable for damage
caused by incorrect use or operation of
any kind.
~
This machine is intended exclusively
for use in interior locations.
~
The installation of this appliance in
non-stationary locations must be
performed by a qualified installer or
service agency in strict accordance
with national and local safety
regulations and standards.
To avoid injury, please follow these
instructions!
~
The machine must be installed,
maintained and repaired by a Miele
Service Technician. For best
compliance with Good Laboratory
Practice and regulations governing the
use of medical products, a Miele Ser-
vice and Repair Contract is
recommended. Repairs by unqualified
persons could be very dangerous!
~
Do not install the machine in an area
where there is a risk of explosion or
freezing.
~
The electrical safety of this machine
is only assured if it is connected to a
properly installed grounding system. It
is imperative that this basic safety
requirement is met. If there is any
doubt, have the electrical system
checked by a qualified electrician.
The manufacturer will not be held liable
for damages resulting from an
inadequate grounding system (e.g.
electric shock).
~
A damaged or leaking machine is
dangerous. Turn off the machine imme-
diately at the power switch and call the
Miele Service Department.
~
Machine operators must be trained
on a regular basis. Untrained personnel
must not be allowed access to the
machine or its controls.
Safety instructions and warnings
4
