Special processes
65
Warning and
Safety instruc-
tions
These warning and safety instructions are in addition to those
given at the beginning of this booklet.
H
2
O
2
solution must only be stored in special containers with asso-
ciated adapters from the Ecolab or Dr. Weigert companies.
Important: observe the chemical agent manufacturer's safety in-
structions as given on their safety data sheets.
Be especially careful when handling H
2
O
2
solution. It is an irritant
chemical. Observe all current safety instructions relating to its use.
Safety goggles and gloves must be worn.
Empty containers must be disposed of in accordance with the
manufacturer's instructions.
H
2
O
2
solution must not be mixed with other chemicals. This could
cause a serious chemical reaction, e. g. the release of harmful va-
pours or gases.
Connecting the
H
2
O
2
solution
container
The connection hose for the H
2
O
2
solution container is identified by a
black label.
The connection hose is supplied without a safety cap as the con-
tainer for hydrogen peroxide will vary depending on supplier.
Connect the supplier's safety cap to the connection hose (black).
Then connect this to the H
2
O
2
solution container.
Then start the DOS2-FILL programme.
Unlike with other chemical agents the H
2
O
2
solution container
must be fully emptied before it is exchanged for a new one.
Do not replace the H
2
O
2
solution container with a new one until the
FILL DOS 2 CONTAINER message is displayed. After connecting
the new container you must run the DOS2-FILL programme.
If the CHECK DISPENSING SYSTEM 2 message appears you
should check the container as well as the dispensing system.
The programme will stop automatically.
