Miele G 7460 Operating Instructions Manual Download Page 74

Page: 74 / 124

Options

Setting “Start at”

With the

Start at

function, you set the

exact time you want the programme to
start at.



Use the



sensor controls to enter

the hour and confirm your entry by
touching

The hour will be saved and the minute
number block will be highlighted.



Use the



sensor controls to enter

the minutes and confirm your entry
by touching

The saved start time for the selected
programme will appear in the display for
several minutes.



Close the door.

When the set time is reached, the se-
lected programme will begin automatic-
ally.

Setting “Finish at”

Use the

Finish at

function to set the

latest time by which the selected pro-
gramme has to be finished.



Use the



sensor controls to enter

the hour and confirm your entry by
touching

The hour will be saved and the minute
number block will be highlighted.



Use the



sensor controls to enter

the minutes and confirm your entry
by touching

The estimated start time for the selec-
ted programme will appear in the dis-
play for several minutes.

A message will appear in the display if
the programme cannot be completed
by the set finish time because it has too
long a running time. It will show the
time that can be set.



If it appears, confirm the message
with



Close the door.

The selected programme will start auto-
matically when the estimated start time
is reached.

Summary of Contents for G 7460





























































































































Search results

Summary of Contents for G 7460

Reviews:

Related manuals for G 7460

Brands by name

Popular brands

Miele G 7460, Operating Instructions Manual

Search results

Summary of Contents for G 7460

Reviews:

Related manuals for G 7460

Brands by name

Popular brands