Operation
69
Display of programme duration
The estimated duration of the selected
programme appears on the display be-
fore the programme begins. If the door
is opened during the programme, the
time left until the end of the programme
is displayed.
Symbols appear to indicate which stage
the programme is at:
Pre-wash/Soak
Main wash
Interim rinse
Final rinse
Drying
End
The displayed duration may vary for the
same programme. It is influenced by,
for example, the temperature of the in-
coming water, the reactivation cycle of
the water softener, the detergent type
and the amount of dishes and how
soiled they are.
When a programme is selected for the
first time, the display will show the aver-
age programme duration for a cold wa-
ter connection.
The programme durations shown in the
“Programme overview” chapter refer to
standard test loads and temperatures.
Each time a programme is run, the con-
trol module calculates the programme
duration according to the temperature
of the water taken into the dishwasher
and the size of the load.
Starting the programme
Start the programme by closing the
door.
If necessary, confirm the previously
displayed message with
OK
.
The optical in-operation indicator light
comes on to show that a programme
sequence has been started.
During a programme sequence, you
can use
OK
to display the name of the
programme that is currently running
when the door is open.
Risk of scalding due to hot wa-
ter.
During operation, water in the dish-
washer may be very hot.
During operation, only open the door
with extreme caution.
