Miele G 7460 Operating Instructions Manual Download Page 41

Page: 41 / 124

Settings

Setting the electricity tariff times

Before you can use the

EcoStart

option,

you must set at least one electricity tar-
iff time.



Use the



sensor controls to select

an electricity tariff time T1–T3 and
confirm with

The start of the electricity tariff time se-
lected will appear in the display and the
hour number block will be highlighted.



Use the



sensor controls to set

the hours and minutes for the start
time and confirm both with

The end of the electricity tariff time se-
lected will appear in the display and the
hour number block will be highlighted.



Use the



sensor controls to set

the hours and minutes for the end
time and confirm both with

The electricity tariff time will be saved
and its priority will appear in the display.



Use the



sensor controls to set

the priority you want and confirm with



Confirm the message with

The electricity tariff time will be activ-
ated.

Changing the electricity tariff times

You can change the start, end or priority
of an electricity tariff time.



Use the



sensor controls to select

an electricity tariff time T1–T3 that
you wish to change and confirm with



Select the setting you want to change
and confirm with



Use the



sensor controls to

change the setting and confirm with



Confirm the message with

The change will be saved.

Summary of Contents for G 7460





























































































































Search results

Summary of Contents for G 7460

Reviews:

Related manuals for G 7460

Brands by name

Popular brands

Miele G 7460, Operating Instructions Manual

Search results

Summary of Contents for G 7460

Reviews:

Related manuals for G 7460

Brands by name

Popular brands