![background image](http://html.mh-extra.com/html/miele/g-7310/g-7310_operating-instructions-manual_234804027.webp)
Before using for the first time
27
Setting the time of day
The time of day is set automatically if
a connection is established with the
WiFi network.
The display will then change to the
screen for setting the time of day.
The current time of day must be set be-
fore you can use the timer option.
Use the
sensor controls to enter
the hour and confirm your entry by
touching
OK
.
Then set the minutes and confirm
with
OK
.
Holding down the relevant
or
sensor control will increase or de-
crease the time automatically.
Setting the water hardness level
The display will change to the screen
for setting the water hardness.
- You should programme the dish-
washer to the correct water hardness
for your area.
- Your local water authority will be able
to advise you of the water hardness
level in your area.
- Where the water hardness fluctuates
e.g. between 1.8 and 2.7 mmol/l (10 -
15 °dH - German scale) always pro-
gramme the dishwasher to the higher
value (2.7 mmol/l or 15 °dH in this ex-
ample).
In the event of a fault, it will help the
service technician if you know the hard-
ness of your local water supply.
Therefore, please enter the water hard-
ness:
____________°dH or mmol/l
The dishwasher is programmed at the
factory for a water hardness level of
2.5 mmol/l (14 °dH – German scale).
Set the water hardness level in your
area and confirm using
OK
.
See the “Settings” chapter, “Water
hardness” section for more informa-
tion.
Summary of Contents for G 7310
