Miele G 7310, Operating Instructions Manual

Page: 21 / 128

Guide to the appliance
21
Display functions
The display is used to select or set the
following:
- The programme
- The timer
- The Settings 
The display can show the following:
- The stage the programme is at
- The estimated time left for the pro-
gramme to run
- The energy and water consumption
(EcoFeedback)
- Any relevant fault messages and in-
formation
To save energy, the dishwasher
switches off after a few minutes if you
do not press any sensor controls dur-
ing this time.
Touch the

sensor control to switch
the dishwasher back on.
The OK sensor control is used to con-
firm a message or setting and also to
move to the next menu or another level.
Under  Further programmes/settings
the right of the display will show a scroll
bar

. This offers further options. These
options can be shown using the
 sensor controls.
You can alter the dishwasher’s controls
to suit changing requirements in the
Settings menu (see “Settings” chapter).
The option that is selected will have a
tick
 next to it.
To exit a sub-menu again use the

Back sensor control.
If you do not press any sensor controls
for several seconds, the display will re-
vert to the previous menu. You may
then have to enter your settings again.