![background image](http://html.mh-extra.com/html/miele/g-693-4/g-693-4_operating-instructions-manual_234786050.webp)
Problem
Possible cause
Remedy
Dishes, cutlery and
glasses are not dry
or are flecked.
The rinse aid amount may
be insufficient or the rinse
aid reservoir empty.
Increase the dosage or
replenish the reservoir, see
"Before using for the first
time".
Crockery was taken out of
the cabinet too soon.
Leave it in for longer.
(See "Operation").
"3 in 1" tabs were used
which are unsuitable for
your water hardness level.
Use a standard liquid, tablet
or powder detergent and
refill the salt and rinse aid
reservoirs in the dishwasher.
The "3 in 1" button was
activated whilst using a
standard detergent (without
rinse aid).
De-select the "3 in 1" button.
(See "Additional functions").
White residue is
visible on cutlery
and crockery,
clouding occurs on
glassware; film can
be wiped off.
Not enough rinse aid was
used.
Increase the dosage,
see "Before using for the
first time".
There is no salt in the salt
reservoir.
Add dishwasher reactivation
salt,
see "Before using for the
first time".
The salt reservoir cap has
not been screwed on
correctly.
Replace it making sure it
screws back on correctly.
The water softener is
programmed to a setting
which is too low.
Programme a higher setting,
see "Before using for the
first time".
"3 in 1" tabs were used
which are unsuitable for
your water hardness level.
Use a standard liquid, tablet
or powder detergent and
refill the salt and rinse aid
reservoirs in the dishwasher.
The "3 in 1" button was
activated whilst using a
standard detergent (without
rinse aid).
De-select the "3 in 1" button.
(See "Additional functions").
Problem solving guide
50
Summary of Contents for G 693-4
Page 59: ...Cutlery tray Comparison tests 59 ...
Page 61: ...Cutlery tray Comparison tests 61 ...
Page 67: ...67 ...