Miele G 693-4, Operating Instructions Manual

Page: 49 / 68

Problem Possible cause Remedy
The dishes are not
clean. The dishes were not
loaded correctly. Dishes
were placed inside other
pieces, water could not
access all surfaces. See notes in "Loading the
dishwasher".
The outlet of the water
intake pipe for the middle
spray arm was covered.
An insufficient amount of
water flowed into the
middle spray arm. Make sure that dishes
placed in the rear section
of the upper basket do not
cover the opening.
The programme was not
powerful enough. Select a more intensive
programme, see
"Programme chart" at the
end of these operating
instructions.
Not enough detergent
was dispensed. Use more detergent, see
"Operating the
dishwasher".
Tall items are blocking the
path of the spray arms. Rearrange the items so
that the spray arms can
rotate freely.
The spray arm jets are
blocked. Clean the spray arm jets,
see "Cleaning and Care".
The filter combination in
the base of the wash
cabinet is not clean or is
not correctly fitted.
This may cause the spray
arm jets to get blocked. Clean and/or replace the
filter combination
correctly. Clean the spray
arm jets, see "Cleaning
and Care".
The non-return valve is
open and blocked. Dirty
water has flowed back
into the wash cabinet. Clean the drain pump and
the non-return valve, see
"Cleaning the drain pump
and non-return valve".
Problem solving guide
49