Setting the machine for water
hardness level 6.5 – 12.6 mmol/l
(36°d - 70°d):
^
Using programme selector button
%
(19) keep pressing down through
programme position 7 until the
Wash/Rinse (16) indicator light
flashes.
You are now in the second
programming level.
^
Use the programme selector buttons
(19) to select the programme position
1 (see Table 2).
The indicator light next to the
programme selected (14) and the
Wash/Rinse indicator light (16) will start
to flash.
Table 2:
°d
(German
scale)
mmol/l
Programme
position
36 - 70
6.5 -12.6
1
^
Press the Start/Stop button (17)
twice.
The programmed water hardness level
is now stored in memory.
^
Switch the dishwasher off using the
On/Off button (13).
Checking the programmed water
hardness level
^
Switch the dishwasher off using the
On/Off button (13).
^
Press the
$
(19) and Start/Stop (17)
buttons in and whilst doing so press
the On/Off button (13) to switch the
dishwasher on.
Then release these buttons.
The water hardness level programmed
into the machine is indicated by a light
being on next to one of the
programmes.
There are two programming levels.
If the Wash/Rinse indicator light (16) is
on, you are in the first level (see
Table 1).
If the Wash/Rinse indicator light (16) is
flashing, you are in the second level
(see Table 2).
^
Switch the dishwasher off using the
On/Off button (13).
Before using for the first time
15
Summary of Contents for G 693-4
Page 59: ...Cutlery tray Comparison tests 59 ...
Page 61: ...Cutlery tray Comparison tests 61 ...
Page 67: ...67 ...
