Miele G 693-4 Operating Instructions Manual Download Page 46

Page: 46 / 68

Problem

Possible cause

Remedy

The indicator light
"Inlet/Drain" is flashing
and the programme
does not continue.

Before rectifying the
problem you must:

–

Press the "Start/Stop"
button for at least one
second.

–

Switch the dishwasher
off using the "On/Off"
button.

Water intake is restricted.

–

Open the stopcock
fully.

–

Check the water inlet
filter and clean if
necessary, see
"Cleaning the water
inlet filter".

–

Remove any kink in the
inlet hose.

–

The water pressure at
the intake is lower than
0.3 bar. Seek
professional advice.

Water outlet is restricted,
water remains in the wash
cabinet at the end of a
programme.

–

Clean the filter
combination, see
"Cleaning and Care".

–

Clean the drain pump,
see "Cleaning the drain
pump and non-return
valve".

–

Clean the non-return
valve, see "Cleaning
the drain pump and
non-return valve".

–

Remove any kink in the
drain hose.

Problem solving guide

Summary of Contents for G 693-4





































































Search results

Summary of Contents for G 693-4

Reviews:

Related manuals for G 693-4

Brands by name

Popular brands

Miele G 693-4, Operating Instructions Manual

Search results

Summary of Contents for G 693-4

Reviews:

Related manuals for G 693-4

Brands by name

Popular brands