Miele G 686 Operating Instructions Manual Download Page 6 | Manualshive

Page: 6 / 68

background image

Warning and safety instructions

This appliance conforms to current
safety requirements. Inappropriate
use can however lead to personal
injury and damage to property.
Read the operating instructions
carefully before starting to use this
machine.This way you will avoid the
risk of accidents, and damage to
the machine.
Keep these instructions in a safe
place for reference, and pass them
on to any future user.

Appropriate usage

This dishwasher is intended exclu-
sively for cleaning domestic croc-

kery and cutlery in a domestic house-
hold. Do not use for purposes other
than those for which it was designed.
Any other applications may be dan-
gerous.
The manufacturer cannot be held re-
sponsible for any damage caused by
improper use or for uses other than
those for which the appliance is in-
tended.

Delivery

A damaged appliance is dan-
gerous. It is therefore essential to

check packaging immediately and
examine the dishwasher for transport
damage. Under no circumstances
should you use a damaged machine.

Please ensure that the packaging
material is offered for recycling.

Installation

The dishwasher must be installed
and connected in compliance with

the installation instructions.

In order to ensure stability, built-
under and integrated dishwashers

must only be installed under a con-
tinuous worktop which is secured to ad-
jacent cabinetry.

The dishwasher must not be in-
stalled under a hob unit. The high

temperatures sometimes dissipated by
radiant heat could damage the dish-
washer.

Do not connect the dishwasher to
the mains supply until it has been

installed.

Check that the voltage, frequency
and fuse rating shown on the data

plate match the household mains sup-
ply.

The electrical safety of this ap-
pliance can only be guaranteed

when continuity is complete between
the appliance and an effective earthing
system. It is imperative that this basic
safety requirement is tested and where
there is any doubt the electrical system
in the house is checked out by a quali-
fied electrician.
The manufacturer cannot be held re-
sponsible for damage caused by the
lack or inadequacy of an effective ear-
thing system (electric shock, for
example).

Warning and safety instructions

6

«
...
4
5
6
7
8
...
»

Summary of Contents for G 686





































































Reviews:

No comments

Related manuals for G 686

Brand: Haier Pages: 6

Brand: Haier Pages: 6

Brand: Haier Pages: 24

Brand: Haier Pages: 12

Brand: Haier Pages: 12

Brand: Haier Pages: 23

Brand: Haier Pages: 12

WASHER 9KG DRYER 7KG

Brand: IFB Pages: 26

Brand: V-ZUG Pages: 4

Brand: V-ZUG Pages: 7

Brand: V-ZUG Pages: 2

Brand: Sammic Pages: 48

Brand: Gaggenau Pages: 22

Brand: Gaggenau Pages: 34

Millennia EDW24

Brand: Dacor Pages: 16

Brand: Logik Pages: 28

Brand: Gorenje Pages: 29

Brand: Asko Pages: 52

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands