Miele G 686 Operating Instructions Manual Download Page 33 | Manualshive

Page: 33 / 68

background image

Programme sequence indicator
lights (16)

Once a programme has been started the
programme sequence indicator lights
(16) show which stage of a programme
is currently in progress.

Time display (15)

The running time of the programme se-
lected shows in the time display (15) in
hours and minutes before a pro-
gramme is started. During a pro-
gramme the time left until the end of
the programme is displayed. The “Time
left” indicator light next to the time dis-
play lights up.

The time displayed in the time display
may vary with the same programme.
This is partly because of the water inlet
temperature at each intake and partly
because of the amount of crockery
being washed.

When the dishwasher is first switched
on the display shows an average time
value for a cold water intake.

Values shown in the programme chart
refer to normal loads and average tem-
peratures and are for guidance only.

Each time a programme is run the elec-
tronic unit takes into account the new
conditions and calculates the pro-
gramme time required. This new figure
is then displayed when this programme
is next selected.

Light ring (18)

The light ring illuminates when the dish-
washer is switched on and goes out 5
minutes after a programme has fin-
ished.
It will come on again for 10 minutes if a
button on the control panel is pressed
or if the programme selector is moved.

If the “Delay Start” function is activated
the light ring will go out 10 minutes
after you have set the delay start time.

It will come on again for 10 minutes if a
button on the control panel is pressed
or if the programme selector is moved
during this delay period.

Operating the dishwasher

33

«
...
31
32
33
34
35
...
»

Summary of Contents for G 686





































































Reviews:

No comments

Related manuals for G 686

WASHER 9KG DRYER 7KG

Brand: IFB Pages: 26

Brand: Labconco Pages: 72

Brand: Haier Pages: 18

Brand: Haier Pages: 16

Brand: Haier Pages: 16

Brand: ZANKER Pages: 40

Brand: Maidaid Halcyon Pages: 15

Brand: Asko Pages: 59

Brand: Hallman Pages: 39

Brand: FAR Pages: 98

Brand: Electrolux Pages: 28

Brand: Electrolux Pages: 27

Brand: Electrolux Pages: 39

Brand: Electrolux Pages: 44

Brand: Electrolux Pages: 24

Brand: Electrolux Pages: 44

Brand: Electrolux Pages: 48

Brand: Electrolux Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands