Increasing the water intake time
The water intake time is set to “normal” at the factory. If the water pressure is lower
than 1.0 bar, too little water will flow into the wash cabinet (see “Checking the
water level”). In this case the water intake time must be increased.
Procedure...
n
lit up
n
flashes
Open the door.
Switch the dishwasher off using the “Off” (
o
) touch
pad.
Press touch pads
b
and
d
and whilst doing so at
the same time switch the dishwasher on by pressing
the “On” (
g
) touch pad.
On
Salt
Release touch pads
b
and
d
again.
On
Salt +
c
Note:
If a different indicator light is flashing,
the process must be repeated.
The following indicator lights
may also light up
, if:
– you have not yet added rinse aid or if rinse aid
needs replenishing,
Rinse aid
– drying heat has been switched off (see “Additional
functions”),
b
– water intake is set to extended time,
d
– the buzzer at the end of a programme has been set
to deactivated (see see “Additional functions”).
e
Solving problems
59
