Procedure...
n
lit up
n
flashes
Once the correct water hardness level has been pro-
grammed in:
Switch the dishwasher off by pressing the “Off” (
o
)
touch pad.
If you need to programme in a different water hardness
level:
Press the pad, corresponding to the water hardness
level in your area. Whilst this pad is pressed in, the
relevant indicator will light up.
1 - 4 °d (0.2 - 0.7 mmol/l): Touch pad
b
5 - 6 °d (0.9 - 1.1 mmol/l): Touch pad
c
7 °d ( 1.3 mmol/l): Touch pad
d
8 - 10 °d (1.4 - 1.8 mmol/l): Touch pad
e
11 - 12 °d (2.0 - 2.2 mmol/l): Touch pad
f
On +
b
On +
c
On +
d
On +
e
On +
f
Salt
Salt
Salt
Salt
Salt
13 - 70 °d (2.3 -12.6 mmol/l): proceed to next page
Release the touch pad.
On Salt
+
c
Depending on what has been programmed the follow-
ing indicator lights may also come on:
b
,
d
,
e
Press touch pad
g
.
On +
g
Salt
Press touch pad
g
again.
On
Salt +
g
Switch the dishwasher off by pressing the “Off” (
o
)
touch pad.
The water hardness level is now stored in the pro-
gramme memory.
Check the setting on the water hardness selector in
the wash cabinet, and change if necessary (see “Set-
ting the water hardness level selector in the wash
cabinet”).
Before using for the first time
15
