Drying heat
In all wash programmes a heater element helps with drying. Drying heat is set as acti-
vated at the factory.
If the heating elements are switched off during drying energy savings of approx. 0.1
kWh electricity can be made.
The dishes are then dried with residual heat. Open the dishwasher door at the end of
a programme to allow the dishes to dry better.
Activation / Deactivation of drying heat
Procedure...
n
lit up
n
flashes
Open the door.
Switch the dishwasher off with the “Off” (
o
) touch pad.
Press touch pads
b
and
d
and whilst doing so at
the same time switch the dishwasher on with the
“On” (
g
) touch pad.
On
Salt
Release touch pads
b
and
d
.
On
Salt +
c
Note:
If a different indicator light
is flashing
,
the process must be repeated from the beginning
again.
The following indicator lights may also
light up
, if:
– you have not yet added rinse aid or if rinse aid
needs replenishing,
Rinse aid
– drying heat had been switched off,
b
– the water intake time has been increased (see “In-
crease water intake time“),
d
– the buzzer at the end of a programme is switched off.
e
Operating the dishwasher
41
