Miele G 6582 Operating Instructions Manual Download Page 97

Page: 97 / 108

Settings menu

Rinse aid

You can adjust the rinse aid dosage for

best results.

The rinse aid dosage can be set from

approx. 0-6 ml.

The factory default setting is 3 ml.
The dosage can turn out to be higher

than the set value due to the automatic

adjustment of the

Sensor wash

pro‐

gramme.
If spots appear on crockery and glass‐

ware:

– Increase the rinse aid dosage.

If clouding or smearing appears on

crockery and glassware:

– Decrease the rinse aid dosage.



Select the rinse aid dosage you want

and confirm this with

Consumption (EcoFeedback)

You can programme the dishwasher so

that the energy and water consumption

of the currently selected programme

appears in the display. The estimated

consumption can be displayed before

the programme starts and the actual

consumption can be displayed after the

programme has finished.

In this menu you can also call up the to‐

tal energy and water used in all previ‐

ous dishwasher programmes (see "Car‐

ing for the environment - EcoFeedback

consumption indicator").

Consumption indicator



Select the

Display

option and confirm

with



Select the setting you want and con‐

firm with

Total consumption



Select the

Total consumption

option

and confirm with



You can call up the values for

Energy

and

Water

with the



arrow but‐

tons.

You can also reset the values for the to‐

tal consumption to 0.



Select the

Reset

option and confirm

with



Select the

Yes

option and confirm

with



Confirm the message with

The values are now reset to 0.

Summary of Contents for G 6582













































































































Search results

Summary of Contents for G 6582

Reviews:

Related manuals for G 6582

Brands by name

Popular brands

Miele G 6582, Operating Instructions Manual

Search results

Summary of Contents for G 6582

Reviews:

Related manuals for G 6582

Brands by name

Popular brands