Miele G 4940 Operating Instructions Manual Download Page 53

Page: 53 / 96

Programme options

Memory

You can use the "Memory" option to
save the last programme used.
Instead of the

ECO

programme, the last

programme used will be selected when
the dishwasher is switched off and
back on again or the door is opened
and then closed at the end of a pro-
gramme.



Switch the dishwasher off with the



button, if it is switched on.



Press the

Start

button in and

whilst

holding it in

switch the dishwasher

on using the



button.

Keep the

Start

button pressed in for

at least four seconds until the

Start

indicator light comes on.

If this does not happen, start the pro-
cedure from the beginning again.



Press the



button six times.

The



indicator will flash rapidly six

times at intervals.

The flashing sequence in the display in-
dicates whether the "Memory" function
is activated or not.

–

 

: "Memory" activated

–

 

: "Memory" deactivated



Press the

Start

button to change the

setting.

The setting is now stored in memory.



Switch the dishwasher off with the



button.

Summary of Contents for G 4940

































































































Search results

Summary of Contents for G 4940

Reviews:

Related manuals for G 4940

Brands by name

Popular brands

Miele G 4940, Operating Instructions Manual

Search results

Summary of Contents for G 4940

Reviews:

Related manuals for G 4940

Brands by name

Popular brands