Programme options
54
Optimise standby
"Optimise standby" is activated by de-
fault.
To save energy the dishwasher will
switch off automatically a few minutes
after the last time a button has been
pressed or after the end of a pro-
gramme.
The dishwasher will not switch off
whilst a programme is running, during
the Delay start period or if there is a
fault.
Optimise standby can be switched off if
you prefer. If you do this the duration
before the dishwasher switches off
automatically increases to approx. 6
hours. Doing this will increase energy
consumption.
Switch the dishwasher off with the
button, if it is switched on.
Press the
Start
button in and
whilst
holding it in
switch the dishwasher
on using the
button.
Keep the
Start
button pressed in for
at least four seconds until the
Start
indicator light comes on.
If this does not happen, start the pro-
cedure from the beginning again.
Press the
button eight times.
The
indicator will flash rapidly eight
times at intervals.
The flashing sequence in the display
shows whether Optimise standby is ac-
tivated or not.
–
: "Optimise standby" activated
–
: "Optimise standby" deactivated
Press the
Start
button to change the
setting.
The setting is now stored in memory.
Switch the dishwasher off with the
button.