Before using for the first time
21
Displaying and setting the water
hardness
Switch the dishwasher off with the
button, if it is switched on.
Press the
Start
button in and
whilst
holding it in
switch the dishwasher
on using the
button.
Keep the
Start
button pressed in for
at least four seconds until the
Start
indicator light comes on.
If this does not happen, start the pro-
cedure from the beginning again.
Press the
button twice.
The
indicator will flash rapidly twice
at intervals.
The value set for the water hardness is
shown as a figure after
in the display
(see chart).
will start flashing in the display.
This is the factory default setting of
15°d.
Use the
Start
button to select the
value which equates to your water
hardness level.
Each press on the button moves you
up a level. When the highest water
hardness level is reached, the setting
starts from the beginning again.
The setting is now stored in memory.
Switch the dishwasher off with the
button.
