Miele G 4940 Operating Instructions Manual Download Page 48

Page: 48 / 96

Programme options

Short



The Short



option reduces the dura-

tion of programmes in which this option
is available.

In order to achieve optimum cleaning
results consumption rates are increased
with this option.



Switch the dishwasher on with the



button.

The

Start

indicator light will flash.



Select a programme.



Press the



button.

The



indicator will light up.



Now you can start a programme.

The option selected will remain active
for that particular programme until the
setting is changed.

DetergentAgent

For optimum cleaning results, the dish-
washer automatically adjusts the pro-
gramme sequence to the type of deter-
gent being used. Depending on the pro-
gramme, this can mean that the running
time and energy consumption vary
slightly.

Summary of Contents for G 4940

































































































Search results

Summary of Contents for G 4940

Reviews:

Related manuals for G 4940

Brands by name

Popular brands

Miele G 4940, Operating Instructions Manual

Search results

Summary of Contents for G 4940

Reviews:

Related manuals for G 4940

Brands by name

Popular brands