Miele G 4920 Operating Instructions Manual Download Page 87

Page: 87 / 92

Water connection

The Miele Waterproof system

As long as your dishwasher has been

installed correctly, the Miele waterproof

anti-leak system will protect you from

water damage.

Connection to the water sup‐

ply



Water in the dishwasher must

not be used as drinking water.

– The dishwasher may be connected to

a cold or hot water supply, max.

60°C.

We would only recommend connec‐

tion to a hot water supply if it is eco‐

nomical, e.g. a solar powered supply.

When connected to a hot water sup‐

ply, all programmes will be carried

out with hot water.

– The inlet hose is approx. 1.5 m long.
– A tap with a 3/4" male thread must

be provided on site.

– Connection to the mains water sup‐

ply should only be carried out by a

qualified and competent person in

strict accordance with national and

local safety regulations. The tap

should be easily accessible once the

appliance has been installed.

– IMPORTANT

Australia and New Zealand

This appliance must be installed ac‐

cording to AS/NZS 3500.1. Back flow

prevention is already integrated in the

appliance.

– The water pressure (flow pressure at

the take-off point) must be between

30 and 1000 kPa (0.3 and 10 bar). If

the water pressure is too high, a

pressure reducer valve must be fit‐

ted.

After connecting the dishwasher to

the water supply, check that all

plumbing connections are watertight.



To avoid any damage to the ap‐

pliance, the dishwasher must only be

operated when it is connected to a

fully vented plumbing system.



The inlet hose must not be

shortened or damaged in any way as

it contains electrical components

(see illustration).

Summary of Contents for G 4920





























































































Search results

Summary of Contents for G 4920

Reviews:

Related manuals for G 4920

Brands by name

Popular brands

Miele G 4920, Operating Instructions Manual

Search results

Summary of Contents for G 4920

Reviews:

Related manuals for G 4920

Brands by name

Popular brands