background image

Caring for the environment

17

Disposal of the packing mate‐

rial

The packaging is designed to protect

the appliance from damage during

transportation. The packaging materials

used are selected from materials which

are environmentally friendly for disposal

and should be recycled.
The packaging consists of the following

materials:
Outer packaging:

– Corrugated cardboard made from up

to 100% recyclable material:

or: Polyethylene (PE) shrink wrap

– Polyproplylene (PP) strapping

Inner packaging:

– Chlorine and fluorine free expanded

polystyrene (EPS)

– Base, lid frame and support battens

made from untreated natural wood

from renewable forests

– Polyethylene (PE) protective wrap

Recycling the packaging reduces the

use of raw materials in the manufactur‐

ing process and also reduces the

amount of waste in landfill sites. Rather

than just throwing these materials

away, please ensure they are recycled.

Ensure that any plastic wrap‐

pings, bags, etc. are disposed of

safely and kept out of the reach of

babies and young children. Danger

of suffocation.

Disposing of your old appli‐

ance

Electrical and electronic appliances of‐

ten contain materials which, if handled

or disposed of incorrectly, could be po‐

tentially hazardous to human health and

to the environment. They are, however,

essential for the correct functioning of

your appliance. Therefore, please do

not dispose of your old appliance with

your household waste.

Please dispose of it at your local com‐

munity waste collection / recycling cen‐

tre.
Ensure that your old appliance presents

no danger to children while being stor‐

ed for disposal.
To enable sorting by type of plastic for

recycling, all plastic parts of the appli‐

ance are labelled with international

standard symbols.

Summary of Contents for G 4920





























































































Reviews: