![background image](http://html.mh-extra.com/html/miele/g-4920/g-4920_operating-instructions-manual_234676021.webp)
Before using for the first time
21
Displaying and setting the water
hardness level
Switch the dishwasher off with the
button if it is switched on.
Press the
Start
button in and,
whilst
holding it in
, switch the dishwasher
on using the
button.
Keep the
Start
button pressed in for
at least four seconds until the
Start
indicator light comes on.
If this does not happen, start the proce‐
dure from the beginning again.
Press the Delay start button
twice.
The
indicator light will flash rapidly
twice at intervals.
The value which has been set for the
water hardness is shown as a figure af‐
ter
in the display (see chart).
will start flashing in the display.
This is the factory default setting of
0.2 mmol/l (1 °d - German scale).
Use the
Start
button to select the val‐
ue which equates to your water hard‐
ness level.
Each press of the button moves you
up a level. When the highest water
hardness level is reached, the setting
starts from the beginning again.
The setting is now stored in memory.
Switch the dishwasher off with the
button.
Summary of Contents for G 4920
