Problem
Possible cause
Remedy
The Wash/Rinse,
Drying and End
indicator lights flash
simultaneously.
There may be a technical
fault.
– Clean the water inlet filter
and clean the drain pump
and non-return valve as
described in
"Maintenance". If this does
not resolve the problem,
– switch the dishwasher off
with the On/Off button
K
.
After a few seconds:
– Switch the dishwasher
back on.
– Select the programme
required with the
programme selector
button.
– Press the Start/Stop
button.
If the programme sequence
indicator lights flash again,
there is a technical fault.
– Call the Service
Department.
The drain pump works
even when the door is
open.
The Waterproof system
has reacted.
– Close the stopcock.
– Call the Service
Department.
Problem solving guide
44
Summary of Contents for G 1XXX Series
Page 65: ...65 ...
Page 66: ...66 ...
Page 67: ...67 ...
Page 68: ...Alteration rights reserved G1142 1152 G2142 2152 1308 M Nr 07 066 491 00 ...