Miele G 1XXX Series, Operating Instructions Manual

Page: 18 / 68

Before using the appliance for
the first time you require:
– Approx. 2 litres of water,
– Approx. 2 kg dishwasher salt*,
– Domestic dishwasher detergent*,
– Rinse aid* formulated for domestic
dishwashers.
Every dishwasher is tested at the
factory.
There will be residual water in the
appliance from this test. It is not an
indication that it has been used
previously.
Filling the salt reservoir
If you use combination products
which have salt in them, such as
"3 in 1" or "4 in 1" products in your
dishwasher, you should still add salt
in order to achieve optimum results
and to ensure that the water softener
continues to function correctly.
If the water in your area is very soft
and constantly
lower than
0.7 mmol/l (4 °d) you should still
add salt before using the
dishwasher for the first time.
The water softener must, however,
still be programmed to correspond
to the water hardness level in your
area. Salt should only be
replenished when the salt indicator
light comes on. In areas with very
soft water this could be after a long
period of time.
Important! Before filling the salt
reservoir with dishwasher salt for the
first time , you must fill it with
approx. 2 litres of water to enable
the salt to dissolve. Once the
dishwasher has been used, there is
always sufficient water in the
reservoir.
,
Inadvertently filling the salt
reservoir with powder or liquid
dishwasher detergent will damage
the water softener. Make sure you
have picked up the correct packet
of dishwasher salt before filling the
salt reservoir!
,
Only use special coarse grained
dishwasher salt for reactivation. Do
not use other salts such as cooking
salt, agricultural grade or gritting
salt. These may contain insoluble
additives which can impair the
functioning of the water softener.
Before using for the first time
18